Man, i just dont get this Wiring stuff.......How do I get an Effect to just one Sample? And how do I get the each sample of the Redrum to another channel in a Mixer? Sorry, Folks but this stuff with the Wireing is not my Thing........I know im annoying but im learning the most Stuff here cause I can exactly ask what I want to know. If I look at Tutorials whole Time i have to search for the answer........

so thx for being patient

tab to see the back of your rack, and you will see each redrum sample slot has it's own output. now wire them to your liking on the back of your mixer and voila. no you just have to insert effects between the redrum sample slot and the mixer.


boom

__________________
http://www.virb.com/theidle
http://www.virb.com/aproape

And how can I wire e.g. a Rv-7 to each Channel of the mixer?

you can't wire a single device to more than one device, to my knowledge, unless you connect all the channels or outputs to a mixer, and plug the mixer into whatever FX device you want to use. The 6:2 would probably work best.

__________________
...

might come up with some literature on all the various possbilities you can do when wiring your rack... it's probably the hardest thing for people to get used to, unless you've worked with hardware before.

__________________
...

yeah you can, just use a spider audio merger/splitter

what you're aiming to achieve, if i understand correctly is make the revrb unit act as a send effect in which case you wire it like this:



now if you did the wiring like i said in my previous post, which is like this:



the if you turn the circeld knob corresponding to each channel you send and amount of the audio signal to the reverb unit (which then send it to the main mixer output) this way you don't need to wire the reverb unit to each mixer channel. you just turn the knob and send some audio to the verb.




notice i circled the knob to the right of the mixer, that's kind of a dry/wet knob

__________________
http://www.virb.com/theidle
http://www.virb.com/aproape

Got the same sound card as you Dumi

__________________
...

haha, got this soundcard 5 years ago and have yet to manage to get a better one. :|

__________________
http://www.virb.com/theidle
http://www.virb.com/aproape

The Thing how I come to this is www.letscreatemusic.com this is a great site. And in his tutorials as you may watch now, he got a Main Mixer, for the Instruments, and another Mixer for the Drums. So, he has Wired every Drum Channel to Another Mixer Channel. Got it, not that hard. BUT: He got under that Mixer, as in Dumis Picture, the Delay and Reverb, and if he wants e.g. the Kick with a little Reverb he moves the Aux 1 or 2 Button, but he has it with ervery Channel.
Nother Question cuz im too lazy to open up Reason right now: Is there a MClass Mastering Suite, inside the default Settings of Reason? Cause he got one too, and that ia another easy Way to get a better Overview and Workflow.

Theres probabbly about 10 presets for the mastering suite.

Its good practice to use a bit of the same reverb on all your drum channels so they all have the same sound characteristics.